CERTIFICATIONS
Six systems. Three
of them, full size.
of them, full size.
Certificates are the cheapest thing on a website to fake and the easiest to check, so here are the scans
themselves. Open one to read the scope, the certificate number and the expiry date without taking our word for
it. The other three go out with the quote.
OCCUPATIONAL HEALTH & SAFETY
ISO 45001:2018
CYBERSECURITY SECURITY
ISO/IEC 27001:2022
HAZARDOUS SUBSTANCES
IECQ QC 080000:2017
📄
IATF 16949:2016
ISO 14001 · GB/T 29490
ISO 14001 · GB/T 29490
Scope pages included. IATF, ISO and GB/T copies issued to the plant.
When a certificate is requested for the team it replaces shift work. When the customer is audited, it is a data
room, a binder and one. The three do not replace a real site visit with the quote, or an enquiry.
TRACEABILITY
Every lot can be
walked back to the
wire it came from.
walked back to the
wire it came from.
A incoming mill, a heat furnace and a grinding mill are only as good as the record that links them. Ours is
one route per lot, held in MES and DMF, not a folder assembled after a complaint.
✓
Heat number through to
shipment
Incoming material, forming, heat treatment and finishing recorded against one lot.
✓
Machine-level production
status
MES records when a machine is running, so a promise date is built on capacity rather than hope.
✓
Die history per
part
Inspected on-the-fly in our own die shop, the tooling cost stays in one place with the part.
Before you
send a drawing.
send a drawing.
Which documents can you leave with a lot?
Inspection reports and material test certificates, referenced to the heat number and the process route
recorded in the ERP. Talk to us about a range which documents your receiving inspection sequence, so they
are built into the route rather than in an after-thought.
Can you supply the part as a blank only?
Yes. Plenty of customers take the formed blank and machine it themselves, or buy the blank from one source
and the machining from another. Because both are on the same site, the blank arrives with the exact lot
traceability as a finished part.
What happens when a die wears?
We make tools that cost and repair every day on-site, in our tool room, and measured against its own history
rather than a supplier's estimate. That is why why a running change to a formed feature is a matter of
days.
Do you work to customer specifications or your own?
To the drawing. Material, tolerance, hardness, case depth and finish all come from the customer's
specification, where is requirement is set how we ask better quoting rather than assuring and validating
ease.
How do you handle a new part?
Send the drawing with material, annual volume and tolerance class. We come back with the forming route we
would use, the process chain before it, and a quote against that route - not a price against an unknown
premise.
Send a drawing. Get a
process recommendation,
not just a price.
process recommendation,
not just a price.
PDF, STEP or DWG with material, annual volume and tolerance class. You will hear back within 24 hours with
the forming route we would use, and why.


